PDL Process Data Logger

Product Description:

OTEK's Process Data Logger PDL (3.78"W x 3.78"H x 3"D) was specifically designed to satisfy the need for long term and capacity data logging in "burn in" ovens for the semiconductor industry, as well as other high reliability applications.

The PDL is loaded with the latest technology (ARM7 Microprocessors, ASICS & DSP) and backed by Otek's over 35 year expertise, patents and exclusive lifetime warranty. 
Applications:  High volume/capacity/long term life test and failure analysis of semiconductor burn-in ovens or other multisignal monitor/control & data logging. Since the PDL has universal volts/mA DC inputs, any sensor/transducer can be easily interfaced to it.  The modular construction of the PDL lends itself to many economical custom variations. Contact Otek for your requirements.
 
1. THE DISPLAY: 5 color coded "assignable" displays to allow monitoring of any variable. At the push of a button (or Serial command) the operator can recall "Hidden" parameters related to the inputs (i.e. temperature, current, voltage).
The  PDL will revert to programmed permanent parameter after 10 seconds to allow for manual data logging or pro?le analysis
 
2. THE MEMORY: (16GB NVM). The memory card is removable (rear) and the PDL can 
address up to 16 GBType: SDHC up to 16 GB.

 

Replacement Units:

Features:

  • Up to 48 single ended or 24 differential channels
  • Julian Clock, date, time, channel # & value stamp
  • X-Y tables and math functions
  • State-of-the-art "ARM7" and DSP technologies
  • Ethernet/Internet, USB, Mod bus, CAN, RS232/422/485, all ASCII
  • Up to 16 Gbytes SDHC Memory
  • V/mADC Universal Inputs
  • Easy to interface to any sensor
  • Ultra compact - rivals flatscreens
  • Easy operator interface HMI compliant
  • Custom modifications, all modular
  • Lifetime warranty (LTD)

Suggested Uses:

  • Ideal for burn-in rack applications
  • Monitor and log >48 signals
  • Date/Time stamps data
  • DCS/SCADA comm

Additional Information:

OTEK's Model  APM  is a four (4) digit green , red or blue LED indicator that accepts standard avionics power of 5-32VDC (Green, Red or Blue digits) and intensity control voltage of 1.5 - 5V 50-440Hz (or DC/Resistance). OTEK's exclusive powerless technique allows the APM to be loop powered causing a maximum of 5VDC burden to the loop.  The APM only requires 2 wires to operate.
 
The heart of the APM is an ASIC that accepts VDC or mADC and can be scaled (internally) to any value. The unit mounts in a standard avionics 1" diameter hole with four (4) mounting screws and connects to Power and signal via a "Twist Lock" circular connector (DBC53H-10-6P, Mating Cable End: MS347640 (L or M) -6S).
 
The APM is fully sealed and it is not affected by differential pressure, liquid spray (NEMA4X) or humidity (See Specs.).
 
APPLICABLE MIL-SPECS:
MIL-STD-461D, 462D, 704E, 130K, 810F, 889B2 & 1472F; MIL-HDBK-217F & 454A, RTCA-160F.

THIS PRODUCT SCHEDULED FOR DISCONTINUATION BASED ON THE AVAILABILITY OF PARTS.  CLICK HERE FOR DETAILS OR SEE MODEL NTM-D AS A REPLACEMENT

OTEK's DCS (3.26"W x 3.26"H x 1.69"D) is designed to replace our old 590 series meter as well the popular 3.5 barrel analog meters.

By popular demand we bring back the old "590" but with New Patented Technology so you can replace the old needle, fragile and inaccurate 19th Century Technology analog meters without changing your panel or wiring. Signal Powered: 4-20mA current loop and 4-30VDC, VAC, AAC, WAC & Hz-ideal for power line monitoring. Externally Powered: V & mADC, V & mA RMS, TC, RTD, Frequency (40-20KHz), pH (0-14), %RH, and customs. The external power options cover the entire industrial range of 5-32 VDC and 90-265VAC. Zero and Span adjustments (12 Turn Pots) are conveniently located on the front. Signal Conditioners:  20+ signal conditioners are available (see description) for Powerless™(Signal Powered) or externally powered applications.The DCS performs a self-test (C.O.P.) on power up for approximately 2 seconds.

THIS PRODUCT SCHEDULED FOR DISCONTINUATION BASED ON THE AVAILABILITY OF PARTS. CLICK HERE FOR DETAILS OR SEE MODEL NTM-F AS A REPLACEMENT.

Our New FPM (3.04"W x 2.04"H) series is a 4 1/2 digit flat pack meter which requires no panel cutout! 

Our New FPM Series is the 2nd generation of our famous "No Panel Cut-Out Required" meters introduced in 1976! The FPM uses ASIC and Nanotechnology to bring you a universal meter for all your applications (See Ordering Information For Listing of Input Functions). Mounting: Just drill a 3/8" (10mm) hole, pass the wires through it and connect them, that's all! Display: Bright 0.6" LED in red or green. Power Supply: Not needed for current loops or VDC signal inputs. That is why we call it PowerlessTM (5VDC for other input signals). Signal Inputs: Signal Powered: 4-20, 10-50mA or 3-30VDC. Externally Powered (5VDC): V/mA DC & RMS, Strain-Gage, RTD, TC, Hertz, %RH, pH, ORP, Peak & Hold or your custom inputs! Peak & Hold: The FPM has Peak & Hold with about 300us(3/sec) response. For high speed (>20KHz) see Option 37 Description.

 

THIS PRODUCT SCHEDULED FOR DISCONTINUATION BASED ON THE AVAILABILITY OF PARTS.  CLICK HERE FOR DETAILS OR SEE MODEL NTM-L AS A REPLACEMENT.

OTEK's LPE (2.91"W x 1.52"H x 2.252"D) is a loop powered panel meter, with super high efficiency 0.56" LED 4 1/2 display and over 30 signal input options!

Another World's First By OTEK! To complement it's world's ? rst LCD (Model LPM) Loop Powered Meter, OTEK developed the exact counter part of it but with super high ef?ciency 0.56" LED display, RS232E and all Loop Powered! 

Several Con?gurations are Available:

1. Loop Powered: Just connect 2 wires (+ & - Loop)
2. Loop Powered with RS232E: Just connect 5 wires
3. USB, 5, 12, 24 or 48VDC Input Power: Just connect 4 wires
4. 90-265VAC Input Power: Just connect 4 wires
5. Power for Transmitter: Just connect 4 wires
6. Serial In Remote Display: Just connect 3 wires 
 
The Connector: Seismic Quali? ed Captive & Plug-In
The Housing: Aluminum Nickel Plated or Plastic, Seismic Qualified. Optional Sanitary housing available.
Adjustments: Front panel adjustments, or via Serial Port.
The Serial I/O: (Optional): RS232E for Loop Powered RS232D, 485 or USB for external power.
 
The Grades:
a. Intrinsically Safe (IS) by design, for CLI, Div. 1 & 2.
b. Mil-Specs: To Your Requirements.
c. Nuclear: 10CFR1050B
d. Industrial: -10 + 700C, 5-95% RH
 
The Technology:  ASIC Nanotechnology for greater reliability

OTEK's LPL (1.73"W x 0.945"H x 0.765"D) ultra small loop or external powered 4 1/2 digit panel meter.

OTEK's  LPL brings you over 30 years of expertise in Loop Powered Meters (we invented it) and its known reliability backed by OTEK's exclusive Lifetime Warranty! You can mount the LPL on a panel, P.C.B. or your own housing. The 12 turn potentiometers for  Zero and Span give you smooth and wide range calibration. You can select from current or voltage signal power or 5VDC power and mounting (P.C.B. or Panel). There is no other more fexible Digital Panel Meter in the market.

THIS PRODUCT SCHEDULED FOR DISCONTINUATION BASED ON THE AVAILABILITY OF PARTS.  CLICK HERE FOR DETAILS OR SEE MODEL NTM-X AS A REPLACEMENT.

OTEK's LPX (4.3"W x 3.9"H x 3.7"D) is a loop or externally powered explosion proof housed digital 4 1/2 display meter with serial I/O.

The World's Largest Loop Powered Instrument Manufacturer since 1974 brings you its Model  LPX which is a variation of the World's First Loop Powered Meter with Serial I/O, the LPM and LPE. The LPX has several added features such as Industry Standard I.R.D.A. communications (I/O) that eliminates the need to stop the hazardous process to re-scale or calibrate the meter.  Serial I/O via RS232, 485 or USB to give you on-site data via wires. Provisions for Signal Conditioners to convert T.C., RTD, S-G, etc. at your request. The compact E.P. housing is the smallest in the market, yet it is fully Class I, Div. 1 & 2 Certified with 3 NPT ports and the display can be rotated 90 degrees inside the case!

Pages