LPB-0 Loop-Powered Bargraph Meter

ATTENTION: THIS ITEM TO BE DISCONTINUED

PLEASE NOTE THAT NO NEW ORDERS WILL BE TAKEN FOR THIS MODEL AFTER 12/2016.  CLICK HERE FOR DETAILS OR SEE THE DESCRIPTION BELOW FOR REPLACEMENT INFORMATION.

Product Description:

PLEASE NOTE THAT NO NEW ORDERS WILL BE TAKEN FOR THIS MODEL AFTER 12/2016.  CLICK HERE FOR DETAILS OR SEE MODELS NTM-M, NTM-N OR NTM-P AS REPLACEMENTS.

The LPB-0 (0.950"W x 6.062"H x 1.775"D) is a ultra slim low cost loop powered edgewise LED bargraph display meter. Panel cutout (0.810"W x 5.410"H)

Another "World's First" joins OTEK's long list of Powerless™(Patented ) Loop Powered Instruments. POWERLESS™:  The LPB-0 has 50 segments bright high efciency segments for 2% resolution and can be set for "Pointer" (1, 3 or 5) as well as full bargraph operation. The unit's low 4.5V burden in the loop allows for multiple units strung along the factory or with only 2 wires and NO power supply to connect. POWERED:  The "Powered" version accepts 6-32 VDC & 90-265 VAC isolated power and 5 VDC nonisolated.  Here you can use any of our standard signal conditioners (see description and ordering information) or we will design it for your.  The LPB series is complemented by other Powerless series for A. C. signals (ACS), DC signals (VSP) and loop signals (LPS) to match your control panel. The bargraph is unicolor red.  For custom colors or segments, use #9 on 3rd digit and specify it. SIGNAL CONDITIONERS:  The LPB series offers over 20 signal conditioners to interface directly to your sensor/transducer (see ordering information and descriptive sections).  The Powered version can supply power to your sensor/transmitter.  The Powerless™ version extract the parasitic power (<100mW) from your signal (ac or dc) to power itself. CUSTOMS:  OTEK has developed over 40 signal conditions (our "SC" series) for any signal and most of them can be included on the LPB.  They even include 4-20mA transmission so the LPB becomes a "transmitter bargraph."  Contact OTEK for your special needs. 

Replacement Units:

Features:

  • Over 20 Inputs (See text)
  • 50 or 51 Unicolor Segments
  • 1, 3, 5 Pointers or Full Bar
  • Custom Color/Ranges/Scales
  • Only 2 Wires To Connect
  • Switchboard Case Also Mounts On 1/4 DIN Cut-Out
  • Only 1" On Front Panel (Option 1)
  • Only 1" Wide (Option 0)
  • Lifetime Warranty

Suggested Uses:

  • Budgetary projects
  • Low power applications
  • Analog meter replacements

Additional Information:

Term Reference: 

PLEASE NOTE THAT NO NEW ORDERS WILL BE TAKEN FOR THIS MODEL AFTER 12/2016.  CLICK HERE FOR DETAILS OR SEE MODEL NTM-9 AS A REPLACEMENT.

The EBD (LED Bargraph Display) is a 4-digit, automatic tricolor bargraph, edgewise digital panel meter. The bargraph display allows for quick, customizable process monitoring, with easy-to-read limit markings and great visibility in a popular 6" form factor. The LED digital display provides the precision required for critical operations. Input signal types range from 4-20mA current loops to RTD temperature-sensing to strain-gages—almost any type of sensor signal can be used! The meter can be powered externally with both AC and DC voltages and is configured with a user-friendly command set over any RS-232, RS-385, or USB network. It can function as a programmable controller, with 4 relays and a DAC for voltage or 4-20mA current loop transmission. Let the EBD be the digital gauge for your system today!

PLEASE NOTE THAT NO NEW ORDERS WILL BE TAKEN FOR THIS MODEL AFTER 12/2016.  CLICK HERE FOR DETAILS OR SEE MODEL NTM-P AS A REPLACEMENT.

 

OTEK's HI-Q101 (1.39"W x 6.60"H x 3.27"D) is not only a form, fit and function replacement of the BE051 & BE101 but a 21st Century technology equivalent of our successful HI-Q Series. The look is similar but the performance is different. Panel cutout (1.06"W x 5.60"H).

You get many included features and options not available before, such as:

*Relays: 2 each with S.P.D.T. 1 amp contacts, or Open Collector Transistors (O.C.T.) for fast switching.

*Limits: 100% adjustable via 15 turn potentiometers on the rear of the unit.

*Display: 101 monolythic bright Red LED display with four (4) Red full digits and "-" sign with over/underange indication for either vertical or horizontal mounting.

*Housing: Same as BE Series with added  rear slots for new options.

*Connector: Same as the BE (edgeboard) or the new "Euro" style plug-in screw terminal connector for 16-22 ga. wire.

*Serial I/O: None, RS232D, RS485, 7 Bit Parallel or USB and you can even power the HI-Q101 from the USB!

*Power Input: 5V non-isolated (like the BE) or 5, 12, 24 & 48VDC or 90-265VAC isolated.

SIGNAL CONDITIONERS:  The HI-Q101 offers over 20 input signal conditioners (see ordering information and description) for all your needs.  Take special note of our patented (#7,626,378) A.C. Powerless™ options (8, B, Y, and Z) for A.C. power line monitoring/control without requiring power supply.  The signal powers the HI-Q101.

 

 

The HI-QSLIM series is a part of Otek’s low cost smart indicators that are versatile and programmable. This series has a variety of display options including a bar graph display with a 51-segment LED array or a 101-segment LED array and a standard 2-digit LED display, available in horizontal or vertical configuration, and a simple 8-digit remote display with limited alpha charachters. Standard colors include red or green with other colors available upon request. As with many of Otek’s products, this meter series has the ability to display a number of variables and scales using 4-20 mA or VDC inputs, including watts, volts, amps, RPM, percent, or any other sensor output. The HI-QSLIM models feature a serial input allowing for use as a serial remote display, or a slave display, for plant intranet. With inputs including RS232C, RS485 I/O or USB I/O, for PLC, DCS and SCADA, making these digital panel meters ideal for any process monitoring needs.

Otek specializes in customizing instrumentation for process control and automation to fit a variety of needs. For more information please contact us. All of Otek’s products are covered by a lifetime warranty.

 

 

OTEK’s HI-QTEK (1.89"W x 6.06"H x 3.58"D) is a programmable intelligent auto-tricolor bargraph/controller that comes in a single or dual bar-digital display.

WHAT IS IT? •It is a Computing Controller  •It is a DCS to Process Interface •It is a Process to SCADA Interface •It is a Remote Process Reporter  •It is a Single Loop Process Controller •It is a Programmable Logic Controller (P.L.C.) •Or Just a Meter!!

PLEASE NOTE THAT NO NEW ORDERS WILL BE TAKEN FOR THIS MODEL AFTER 12/2016.  CLICK HERE FOR DETAILS OR SEE MODEL NTM-9 AS A REPLACEMENT.

The LBD (1.74"W x 6.00"H x 2.30"D) is a versatile loop powered 4 1/2 digit LCD bargaph controller with over 20 different input signal options. Panel cutout (1.77"W x 5.70"H).

The Innovator & Leader on Automatic Tricolor Bargraphs, now offers you the latest technology for replacement and new applications. The New LBD Series uses a highly integrated DSP  and Nanowatt microcontroller along with a proven software package approved and used by the Military & Nuclear Industries on its popular HI-Q Series. SIGNAL CONDITIONERS:  20+ signal conditioners are available (more soon).  See ordering information and description section.

The LBD is available in 2 basic versions: 1. Loop Powered: Uses NANOWATT Technology for display, RS232E I/O and Automatic Tricolor Backlight. 2. Externally Powered: ANALOG INPUTS: Industry's standard 4-20mA, mA and VDC are included. Custom signal conditioners for %RH, pH, TC, RTD, RMS, S-G and more are available on request. MATH FUNCTIONS: RTD, TC & X-Y linearization plus Tare, Offset, Scale, Peak and more are programmable via simple commands. (Needs Serial I/O).CONTROL OUTPUTS: 4 each relays or 4 open collector transistors for High, High-High, Low and Low-Low Control. (Needs Serial I/O)ANALOG OUTPUT: Optional isolated 0-1mA, 4-20mA, 0-20mA or 0-5VDC with 16 Bit resolution. (Needs Serial I/O) SERIAL I/O" Standard is RS232 with optional RS485 or USB. You can even power the LBD via the USB port (2W Max.). POWER INPUT: Standard is 5VDC with optional isolated 6-32VDC, 90-265VAC or USB powered. POWER OUTPUT FOR 4-20mA TRANSMITTER: Only available with External Power either non-isolated 28VDC @ 20mA or isolated 30V @ 20mA.

PLEASE NOTE THAT NO NEW ORDERS WILL BE TAKEN FOR THIS MODEL AFTER 12/2016.  CLICK HERE FOR DETAILS OR SEE MODELS NTM-M, NTM-N OR NTM-P AS REPLACEMENTS.

The LPB-0 (0.950"W x 6.062"H x 1.775"D) is a ultra slim low cost loop powered edgewise LED bargraph display meter. Panel cutout (0.810"W x 5.410"H)

Another "World's First" joins OTEK's long list of Powerless™(Patented ) Loop Powered Instruments. POWERLESS™:  The LPB-0 has 50 segments bright high efciency segments for 2% resolution and can be set for "Pointer" (1, 3 or 5) as well as full bargraph operation. The unit's low 4.5V burden in the loop allows for multiple units strung along the factory or with only 2 wires and NO power supply to connect. POWERED:  The "Powered" version accepts 6-32 VDC & 90-265 VAC isolated power and 5 VDC nonisolated.  Here you can use any of our standard signal conditioners (see description and ordering information) or we will design it for your.  The LPB series is complemented by other Powerless series for A. C. signals (ACS), DC signals (VSP) and loop signals (LPS) to match your control panel. The bargraph is unicolor red.  For custom colors or segments, use #9 on 3rd digit and specify it. SIGNAL CONDITIONERS:  The LPB series offers over 20 signal conditioners to interface directly to your sensor/transducer (see ordering information and descriptive sections).  The Powered version can supply power to your sensor/transmitter.  The Powerless™ version extract the parasitic power (<100mW) from your signal (ac or dc) to power itself. CUSTOMS:  OTEK has developed over 40 signal conditions (our "SC" series) for any signal and most of them can be included on the LPB.  They even include 4-20mA transmission so the LPB becomes a "transmitter bargraph."  Contact OTEK for your special needs. 

Pages